C55 LHL
HS Style
Structural & Design Features:
- Right Angle
Worm-Gear Reducer
- Forged
Manganese Bronze Worm-Gear
- Induction
Hardened, Ground and Polished Worm
- Annealed
Cast Iron Housing, Precision Machined for Accurate Shaft
Alignment
- Ball
Bearings on Input Shaft, Front & Back
- Tapered
Roller Bearings on Output Shaft
- High-Strength,
Heat Treated Input and Output Shafts
- Extended End Bells on
Output Shaft for Long Shaft Requirements and Bearing Supports
- Flange for
Face-Mounting NEMA 56C Frame Motor
- Available Through Input
Shaft for Clutch and Brake
Output
Options:
- Available
with 3 Shaft Extensions - L, B, and R
| Ratio |
10 |
15 |
20 |
24 |
30 |
40 |
45 |
48 |
60 |
| Output Speed, RPM |
172.5 |
115 |
86.25 |
71.87 |
57.5 |
43.13 |
38.33 |
35.94 |
28.75 |
| HP In |
1.89 |
1.40 |
1.14 |
0.99 |
0.84 |
0.67 |
0.61 |
0.58 |
0.48 |
| HP Out |
1.69 |
1.18 |
0.93 |
0.77 |
0.62 |
0.46 |
0.41 |
0.38 |
0.28 |
| Torque Out, In.-Lbs. |
617 |
650 |
675 |
679 |
681 |
673 |
665 |
658 |
620 |
Overhung Load on Output
Shaft, 660 Lbs. at 1.50 in. from Output Cap
All data is for a Service Factor
of 1 at 1725 RPM input speed
Dimensions:
