Home Right Angle Speed Reducers Parallel Shaft Gear Reducers Gearmotors About Us Contact Us
Home
Right Angle
Inline Parallel Shaft
Right Angle w/DC Motor
On-Line Inquiry
Search for Model by Input Horsepower and Gear Ratio:
Step 1:
Horsepower (HP):		 gearbox
Step 2:
Gear Ratio (RPM):
Step 3:
Note: Ratings are for a 1.0 Service Factor at 1725 RPM input speed
C55 Series of Right Angle Gear Reducers
C55 right angle gear reducers
  • C55 Worm-Gear Reducers
  • Right Angle Worm-Gear Reducer
  • Forged Manganese Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft, Front & Back of Housing
  • Tapered Roller Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Available with 3 shaft extensions (left, right or both)
  • Available in up to 9 gear ratios
  • Sample applications where the C55 line of right angle gear reducers can be used include:
  • Egg Collectors
  • General Applications
Model C55 HS: Right Angle Gear Reducer
C55HS Right Angle Worm-Gear Reducer
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Overhung Load on Output Shaft, 780 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 10 15 20 24 30 40 45 48 60
Output Speed, RPM 172.5 115 86.25 71.87 57.5 43.13 38.33 35.94 28.75
HP In 1.89 1.40 1.14 0.99 0.84 0.67 0.61 0.58 0.48
HP Out 1.69 1.18 0.93 0.77 0.62 0.46 0.41 0.38 0.28
Torque Out, In.-Lbs. 617 650 675 679 681 673 665 658 620
 
Model C55 RS: Right Angle Gear Reducers
C55RS Right Angle Worm-Gear Reducer
  • Overhung Load on Output Shaft, 780 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 10 15 20 24 30 40 45 48 60
Output Speed, RPM 172.5 115 86.25 71.87 57.5 43.13 38.33 35.94 28.75
HP In 1.89 1.40 1.14 0.99 0.84 0.67 0.61 0.58 0.48
HP Out 1.69 1.18 0.93 0.77 0.62 0.46 0.41 0.38 0.28
Torque Out, In.-Lbs. 617 650 675 679 681 673 665 658 620
 
Model C55 ES: Right Angle Gear Reducers
C55ES Right Angle Worm-Gear Reducer
  • Overhung Load on Output Shaft, 780 Lbs. at 1.25 in. from Housing orOutput Cap
Ratio 10 15 20 24 30 40 45 48 60
Output Speed, RPM 172.5 115 86.25 71.87 57.5 43.13 38.33 35.94 28.75
HP In 1.89 1.40 1.14 0.99 0.84 0.67 0.61 0.58 0.48
HP Out 1.69 1.18 0.93 0.77 0.62 0.46 0.41 0.38 0.28
Torque Out, In.-Lbs. 617 650 675 679 681 673 665 658 620
 
Model C55 LHL: Right Angle Gear Reducers
C55LHL Right Angle Worm-Gear Reducer
  • Extended End Bells on Output Shaft for Long Shaft Requirements and Bearing Supports
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Available Through Input Shaft for Clutch and Brake
  • Overhung Load on Output Shaft, 660 Lbs. at 1.50 in. from Output Cap
Ratio 10 15 20 24 30 40 45 48 60
Output Speed, RPM 172.5 115 86.25 71.87 57.5 43.13 38.33 35.94 28.75
HP In 1.89 1.40 1.14 0.99 0.84 0.67 0.61 0.58 0.48
HP Out 1.69 1.18 0.93 0.77 0.62 0.46 0.41 0.38 0.28
Torque Out, In.-Lbs. 617 650 675 679 681 673 665 658 620
 
C70 Series of Right Angle Gear Reducers
C70 right angle gear reducers
  • C70 Worm-Gear Reducers
  • Right Angle Worm-Gear Reducer
  • Forged Manganese Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft, Front & Back of Housing
  • Tapered Roller Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Available with 3 shaft extensions (left, right or both)
  • Available in up to 8 gear ratios
  • Sample applications where the C70 line of right angle gear reducers can be used include:
  • Winches
  • Conveyors
  • General Applications
Model C70 HS: Right Angle Gear Reducers
C70HS right angle worm-gear reducer
  • Overhung Load on Output Shaft, 850 Lbs. at 1.25 in. from Housing or Output Cap
  • Flange for Face-Mounting NEMA 56C Frame Motor
Ratio 10 12 20 24 30 40 48 60
Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP In 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Out 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out, In.-Lbs. 1119 1164 1236 1243 1248 1235 1208 1138
 
Model C70 RS: Right Angle Gear Reducers
C70RS right angle worm-gear reducer
  • Overhung Load on Output Shaft, 850 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 10 12 20 24 30 40 48 60
Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP In 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Out 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out, In.-Lbs. 1119 1164 1236 1243 1248 1235 1208 1138
 
Model C70 H43S: Right Angle Gear Reducers
C70H43S right angle worm-gear reducer
  • Overhung Load on Output Shaft, 1000 Lbs. at 1.25 in. from Housing or Output Cap
  • Flange for Face-Mounting NEMA 143 Frame Motor
Ratio 10 12 20 24 30 40 48 60
Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP In 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Out 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out, In.-Lbs. 1119 1164 1236 1243 1248 1235 1208 1138
 
Model C70 LGHS: Right Angle Gear Reducers
C70LGHS right angle worm-gear reducer
  • Right Angle Worm-Gear Reducer - Heavy Duty
  • Larger Internal Diameter Output Shaft for Higher Overhung Load Rating
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Overhung Load on Output Shaft, 1000 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 10 12 20 24 30 40 48 60
Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP In 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Out 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out, In.-Lbs. 1119 1164 1236 1243 1248 1235 1208 1138
 
Model C70 LHL: Right Angle Gear Reducers
C70LHL right angle worm-gear reducer
  • Extended End Bells on Output Shaft for Long Shaft Requirements and Bearing Supports
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Overhung Load on Output Shaft, 650 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 10 12 20 24 30 40 48 60
Output Speed, RPM 172.5 143.7 86.25 71.87 57.5 43.13 35.94 28.75
HP In 3.36 2.96 2.00 1.72 1.45 1.15 0.99 0.80
HP Out 3.06 2.65 1.69 1.42 1.14 0.84 0.69 0.52
Torque Out, In.-Lbs. 1119 1164 1236 1243 1248 1235 1208 1138
Model TC43: Right Angle Gear Reducers
TC 43 right angle worm gear reducer
  • Right angle worm-gear reducer with forged manganese bronze worm-gears
  • Induction hardened, ground and polished worm
  • Tapered roller bearings on output shaft
  • Annealed cast iron housing that is precision machined for accurate shaft alignment
  • Ball bearings on input shaft
  • High-strength and heat treated input and output shafts
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Available with 3 shaft extensions (left, right or both)
  • Available in up to 7 gear ratios
Ratio 5.5 10 14.5 20 30 40 61
Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP In 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Out 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out, In.-Lbs. 239 367 401 401 367 399 332
 
Model TC 43 I: Right Angle Gear Reducer w/ DC Motor Frame
TC43I gearbox with DC motor frame
  • Right Angle Worm-Gear Reducer
  • Forged Manganese Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Tapered Roller Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Available with 3 Shaft Extensions - L, B, and R
  • Overhung Load on Output Shaft, 400 Lbs. at 1.00 in. from Housing or Output Cap
Ratio 5.5 10 14.5 20 30 40 61
Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP In 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Out 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out, In.-Lbs. 239 367 401 401 367 399 332
 
Model CE 34: Right Angle Gear Reducer w/ DC Motor Frame
CE34 gearbox with DC motor frame
  • Right Angle Worn-Gear Reducer
  • Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Aluminum Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Ball Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting DC Frame Motor
  • Available with 3 Shaft Extensions - L (left), B (both), R (right)
  • up to 7 gear ratios
Ratio 8 14.5 20 40 60
Output Speed, RPM 375 206.9 150 75 50
HP IN .96 .67 .44 .25 .14
HP OUT .89 .58 .37 .18 .09
Torque OUT, In.-Lbs. 149 177 153 153 114
Overhung Load, Output at 2 in. from Housing, Lbs. 36 53 64 92 110
 
Model L60: Right Angle Gear Reducers
L60 right angle worm gear reducers
  • Right angle worm-gear reducer with forged manganese bronze worm-gears
  • Induction hardened, ground and polished worm
  • Tapered roller bearings on output shaft
  • Annealed cast iron housing that is precision machined for accurate shaft alignment
  • Ball bearings on input shaft
  • High-strength and heat treated input and output shafts
  • Available with 3 shaft extensions (left, right or both)
  • Available in up to 7 gear ratios
Ratio 5.5 10 14.5 20 30 40 61
Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP In 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Out 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out, In.-Lbs. 239 367 401 401 367 399 332
 
L60 Series of Right Angle Gear Reducers
L60 gear reducers
  • L60 Right Angle Gear Reducers w/ DC Motor Frame
  • Right Angle Worm-Gear Reducer
  • Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Tapered Roller Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Flange for Face-Mounting DC Frame Motor
  • Available with 3 Shaft Extensions - L (left), B (both), and R (right)
  • Up to 7 Gear Ratios
  • Sample applications where the L60 line of right angle gear reducers with DC motor frame can be used include:
  • Curtain Control
  • Egg Collectors
Model L60C: Right Angle Gear Reducer w/ DC Motor Frame
L60C right angle worm-gear reducer
  • Overhung Load on Output Shaft, 400 Lbs. at 1.00 in. from Housing or Output Cap
Ratio 5.5 10 14.5 20 30 40 61
Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP In 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Out 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out, In.-Lbs. 239 367 401 401 367 399 332
 
Model L60D: Right Angle Gear Reducer w/ DC Motor Frame
L60D right angle worm-gear reducer
  • Overhung Load on Output Shaft, 400 Lbs. at 1.00 in. from Housing or Output Cap
Ratio 5.5 10 14.5 20 30 40 61
Output Speed, RPM 314 172.5 118.97 86.25 57.5 43.12 28.28
HP In 1.31 1.14 0.90 0.69 0.47 0.42 0.27
HP Out 1.19 1.00 0.75 0.54 0.33 0.27 0.14
Torque Out, In.-Lbs. 239 367 401 401 367 399 332
 
Model U-50 RS: Right Angle Gear Reducers
U50RS worm gear reducer
  • Right Angle Worm-Gear Reducer
  • Forged Manganese Bronze Worm-Gear
  • Induction Hardened, Ground and Polished Worm
  • Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft, Front & Back
  • Tapered Roller Bearings on Output Shaft
  • High-Strength, Heat Treated Input and Output Shafts
  • Available with 3 Shaft Extensions - L, B, and R
  • Overhung Load on Output Shaft, 780 Lbs. at 1.25 in. from Housing or Output Cap
Ratio 20 40 60
Output Speed, RPM 86.25 43.13 28.75
HP In 1.00 0.62 0.43
HP Out 0.87 0.43 0.26
Torque Out, In.-Lbs. 625 620 580
 
TM-RS Series of Speed Reducers
TM-RS speed reducers
  • TM-RS Right Angle Gear Speed Reducers
  • Right Angle Worm-Gear Reducer
  • Bronze Worm-Gear
  • Hardened and Ground Worm
  • Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Tapered Roller Bearings on Output Shaft
  • Heat Treated Input and Output Shafts
  • Available with 2 Shaft Extensions (left or right)
  • Up to 8 Gear Ratios
  • Mounting bases available upon request
Model T133M-RS: Industry Standard Right Angle Gear Reducers
T133M-RS speed reducers
  • Overhung Load on Output Shaft, 154 Lbs.
Ratio 5 10 20 30 40 50 60
Output Speed, RPM 350 175 88 58 44 35 29
HP In 1.20 0.78 0.52 0.36 0.31 0.26 0.20
HP Out 1.20 0.78 0.52 0.36 0.31 0.26 0.25
Torque Out, In.-Lbs. 170 216 230 240 232 226 212
 
Model T175M-RS: Industry Standard Right Angle Gear Reducers
T175M-RS speed reducers
  • Overhung Load on Output Shaft, 285 Lbs.
Ratio 5 10 20 30 40 50 60
Output Speed, RPM 350 175 88 58 44 35 29
HP In 2.05 1.40 0.52 0.36 0.31 0.26 0.25
HP Out 1.62 1.25 0.52 0.36 0.31 0.26 0.25
Torque Out, In.-Lbs. 305 410 450 455 450 420 395
 
Model T206M-RS: Industry Standard Right Angle Gear Reducers
T206M-RS speed reducers
  • Overhung Load on Output Shaft, 285 Lbs.
Ratio 5 10 20 30 40 50 60
Output Speed, RPM 350 175 88 58 44 35 29
HP In 2.90 1.02 1.20 0.90 0.70 0.62 0.53
HP Out 2.40 1.78 1.10 0.80 0.76 0.54 0.50
Torque Out, In.-Lbs. 430 600 660 670 665 640 605
 
Model T237M-RS: Industry Standard Right Angle Gear Reducers
T237M-RS speed reducers
  • Overhung Load on Output Shaft, 535 Lbs.
Ratio 5 10 20 30 40 50 60
Output Speed, RPM 350 175 88 58 44 35 29
HP In 3.91 2.72 1.62 1.20 1.00 0.83 0.69
HP Out 3.05 2.15 1.40 1.00 0.80 0.70 0.60
Torque Out, In.-Lbs. 590 820 920 930 925 880 830
 
Model T262M-RS: Industry Standard Right Angle Gear Reducers
T262M-RS speed reducers
  • Overhung Load on Output Shaft, 1000 Lbs.
  • All data is for 1725 rpm input speed
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 345 172.5 115 86.25 57.5 43.13 34.5 28.75
HP In 5.24 4.17 3.22 2.67 2.22 1.85 1.37 1.16
HP Out 4.86 3.74 2.81 2.21 1.68 1.32 0.92 0.77
Torque Out, In.-Lbs. 924 1445 1577 1563 1827 1919 1658 1670
 
Model T325M-RS: Industry Standard Right Angle Gear Reducers
T325M-RS speed reducers
  • Overhung Load on Output Shaft, 1200 Lbs.
  • All data is for 1725 rpm input speed
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 345 172.5 115 86.25 57.5 43.13 34.5 28.75
HP In 9.72 7.19 5.45 4.74 3.66 3.35 2.49 2.03
HP Out 9.06 6.46 4.65 4.07 2.80 2.55 1.88 1.44
Torque Out, In.-Lbs. 1724 2419 2611 2875 3045 3692 3413 3127
 
TM-HS Series of Speed Reducers
TM-HS speed reducers
  • TM-HS Right Angle Speed Reducers
  • Right Angle Worm-Gear Reducer
  • Bronze Worm-Gear
  • Hardened and Ground Worm
  • Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Tapered Roller Bearings on Output Shaft
  • Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 56C Frame Motor
  • Available with 3 Shaft Extensions (left, right or both)
  • Up to 8 Gear Ratios
  • Mounting bases available upon request
Model T133M-HS: Industry Standard Right Angle Gear Reducers
T133M-HS speed reducers
  • Overhung Load on Output Shaft, 160 Lbs.
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 350 175 120 88 58 44 35 29
HP In 1.20 0.78 0.62 0.52 0.36 0.31 0.26 0.25
HP Out 1.20 0.78 0.62 0.52 0.36 0.31 0.26 0.25
Torque Out, In.-Lbs. 170 216 230 230 240 232 226  
 
Model T175M-HS: Industry Standard Right Angle Gear Reducers
T175M-HS speed reducers
  • Overhung Load on Output Shaft, 285 Lbs.
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 350 175 120 88 58 44 35 29
HP In 2.05 1.40 1.05 0.89 0.65 0.56 0.44 0.37
HP Out 1.62 1.25 0.98 0.82 0.60 0.51 0.42 0.37
Torque Out, In.-Lbs. 305 410 440 450 455 450 420 395
 
Model T206M-HS: Industry Standard Right Angle Gear Reducers
T206M-HS speed reducers
  • Overhung Load on Output Shaft, 500 Lbs.
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 350 175 120 88 58 44 35 29
HP In 2.90 2.02 1.50 1.20 0.90 0.70 0.62 0.53
HP Out 2.40 1.78 1.30 1.10 0.80 0.76 0.54 0.50
Torque Out, In.-Lbs. 430 600 650 660 670 665 640 605
 
Model T237M-HS: Industry Standard Right Angle Gear Reducers
T237M-HS speed reducers
  • Overhung Load on Output Shaft, 535 Lbs.
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 350 175 120 88 58 44 35 29
HP In 3.91 2.72 2.00 1.62 1.20 1.00 0.83 0.69
HP Out 3.05 2.15 1.65 1.40 1.00 0.80 0.70 0.60
Torque Out, In.-Lbs. 590 820 890 920 930 925 880 830
 
Model T262M-HS: Industry Standard Right Angle Gear Reducers
T262M-HS speed reducers
  • Overhung Load on Output Shaft, 1000 Lbs.
  • All data is for 1725 rpm input speed
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 345 172.5 115 86.25 57.5 43.13 34.5 28.75
HP In 5.24 4.17 3.22 2.67 2.22 1.85 1.37 1.16
HP Out 4.86 3.74 2.81 2.21 1.68 1.32 0.92 0.77
Torque Out, In.-Lbs. 924 1445 1577 1563 1827 1919 1658 1670
 
Model T325M-HS: Industry Standard Right Angle Gear Reducers
T325M-HS speed redcuers
  • Overhung Load on Output Shaft, 1200 Lbs.
  • All data is for 1725 rpm input speed
Ratio 30 40 50 60
Output Speed, RPM 57.5 43.13 34.5 28.75
HP In 3.66 3.35 2.49 2.03
HP Out 2.80 2.55 1.88 1.44
Torque Out, In.-Lbs. 3045 3692 3413 3127
 
TM-H43S Series of Speed Reducers
TM-H43S speed reducers
  • TM-H43S Right Angle Speed Gear Reducers
  • Right Angle Worm-Gear Reducer
  • Bronze Worm-Gear
  • Hardened and Ground Worm
  • Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
  • Ball Bearings on Input Shaft
  • Tapered Roller Bearings on Output Shaft
  • Heat Treated Input and Output Shafts
  • Flange for Face-Mounting NEMA 145TC Frame Motor
  • Available with 3 Shaft Extensions (left, right or both)
  • Up to 8 Gear Ratios
  • Mounting bases available upon request
Model T237M-H43S: Industry Standard Right Angle Gear Reducers
T237M-H43S speed reducers
  • Overhung Load on Output Shaft, 900 Lbs.
  • All data is for 1725 rpm input speed
Ratio 20
Output Speed, RPM 86.25
HP In 2.06
HP Out 1.69
Torque Out, In.-Lbs. 1195
 
Model T262M-H43S: Industry Standard Right Angle Gear Reducers
T262M-H43S speed reducers
  • Overhung Load on Output Shaft, 1000 Lbs.
  • All data is for 1725 rpm input speed
Ratio 5 10 15 20 30
Output Speed, RPM 345 172.5 115 86.25 57.5
HP In 5.24 4.17 3.22 2.67 2.22
HP Out 4.86 3.74 2.81 2.21 1.68
Torque Out, In.-Lbs. 924 1445 1577 1563 1827
 
Model T325M-H43S: Industry Standard Right Angle Gear Reducers
T325M-H43S speed reducers
  • Overhung Load on Output Shaft, 1200 Lbs.
  • All data is for 1725 rpm input speed
Ratio 5 10 15 20 30 40 50 60
Output Speed, RPM 345 172.5 115 86.25 57.5 43.13 34.5 28.75
HP In 9.72 7.19 5.45 4.74 3.66 3.35 2.49 2.03
HP Out 9.06 6.46 4.65 4.07 2.80 2.55 1.88 1.44
Torque Out, In.-Lbs. 1724 2419 2611 2875 3045 3692 3413 3127