Gear Reducers, Gear motors - Toledo Gearmotor

C55-HS Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 780 lbs. at 1.25 in. from housing or output cap
All data is for Service Factor of 1 at 1725 RPM input speed
Available with 9 Gear Ratios (See Chart Below)

Ratio	10	15	20	24	30	40	45	48	60
Output Speed, RPM	172.5	115	86.25	71.87	57.5	43.13	38.33	35.94	28.75
HP Input	1.89	1.40	1.14	0.99	0.84	0.67	0.61	0.58	0.48
HP Output	1.69	1.18	0.93	0.77	0.62	0.46	0.41	0.38	0.28
Torque Out (In Lbs.)	617	650	675	679	681	673	665	658	620

Download the Brochure Here

Download specifications for C55-HS Right Angle Gear Reducer

C55-RS Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 780 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 9 Gear Ratios (See Chart Below)

Ratio	10	15	20	24	30	40	45	48	60
Output Speed, RPM	172.5	115	86.25	71.87	57.5	43.13	38.33	35.94	28.75
HP Input	1.89	1.40	1.14	0.99	0.84	0.67	0.61	0.58	0.48
HP Output	1.69	1.18	0.93	0.77	0.62	0.46	0.41	0.38	0.28
Torque Out (In Lbs.)	617	650	675	679	681	673	665	658	620

Download the Brochure Here

Download specifications for C55-RS Right Angle Gear Reducer

C55-ES Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 780 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 9 Gear Ratios (See Chart Below)

Ratio	10	15	20	24	30	40	45	48	60
Output Speed, RPM	172.5	115	86.25	71.87	57.5	43.13	38.33	35.94	28.75
HP Input	1.89	1.40	1.14	0.99	0.84	0.67	0.61	0.58	0.48
HP Output	1.69	1.18	0.93	0.77	0.62	0.46	0.41	0.38	0.28
Torque Out (In Lbs.)	617	650	675	679	681	673	665	658	620

Download the Brochure Here

Download specifications for C55-ES Right Angle Gear Reducer

C55L-HL Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Available Through Input Shaft for Clutch and Brake
● Extended End Bells on Output Shaft for Long Shaft Requirements and Bearing Supports

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 660 lbs. at 1.50 in. from housing or output cap
All data is for a Service Factor or 1 at 1725 RPM input speed
Available with 9 Gear Ratios (See Chart Below)

Ratio	10	15	20	24	30	40	45	48	60
Output Speed, RPM	172.5	115	86.25	71.87	57.5	43.13	38.33	35.94	28.75
HP Input	1.89	1.40	1.14	0.99	0.84	0.67	0.61	0.58	0.48
HP Output	1.69	1.18	0.93	0.77	0.62	0.46	0.41	0.38	0.28
Torque Out (In Lbs.)	617	650	675	679	681	673	665	658	620

Download the Brochure Here

Download specifications for C55-LHL Right Angle Gear Reducer

C70-HS Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	10	12	20	24	30	40	48	60
Output Speed, RPM	172.5	143.7	86.25	71.87	57.5	43.13	35.94	28.75
HP Input	3.36	2.96	2.00	1.72	1.45	1.15	0.99	0.80
HP Output	3.06	2.65	1.69	1.42	1.14	0.84	0.69	0.52
Torque Out (In Lbs.)	1119	1164	1236	1243	1248	1235	1208	1138

Download the Brochure Here

Download specifications for C70-HS Right Angle Gear Reducer

C70-RS Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	10	12	20	24	30	40	48	60
Output Speed, RPM	172.5	143.7	86.25	71.87	57.5	43.13	35.94	28.75
HP Input	3.36	2.96	2.00	1.72	1.45	1.15	0.99	0.80
HP Output	3.06	2.65	1.69	1.42	1.14	0.84	0.69	0.52
Torque Out (In Lbs.)	1119	1164	1236	1243	1248	1235	1208	1138

Download the Brochure Here

Download specifications for C70-RS Right Angle Gear Reducer

C70-H43S Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 143 Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 850 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	10	12	20	24	30	40	48	60
Output Speed, RPM	172.5	143.7	86.25	71.87	57.5	43.13	35.94	28.75
HP Input	3.36	2.96	2.00	1.72	1.45	1.15	0.99	0.80
HP Output	3.06	2.65	1.69	1.42	1.14	0.84	0.69	0.52
Torque Out (In Lbs.)	1119	1164	1236	1243	1248	1235	1208	1138

Download the Brochure Here

Download specifications for C70-H43S Right Angle Gear Reducer

C70L-GHS Right Angle Gear Reducer – Heavy Duty

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Larger Internal Diameter Output Shaft for Higher Overhung Load Rating
● Flange for Face-Mounting NEMA 56C Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 1000 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	10	12	20	24	30	40	48	60
Output Speed, RPM	172.5	143.7	86.25	71.87	57.5	43.13	35.94	28.75
HP Input	3.36	2.96	2.00	1.72	1.45	1.15	0.99	0.80
HP Output	3.06	2.65	1.69	1.42	1.14	0.84	0.69	0.52
Torque Out (In Lbs.)	1119	1164	1236	1243	1248	1235	1208	1138

Download the Brochure Here

Download specifications for C70-LGHS Right Angle Gear Reducer

C70L-HL Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft - Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Extended End Bells on Output Shaft for Long Shaft Requirements and Bearing Supports
● Flange for Face-Mounting NEMA 56C Frame Motor
● Available Through Input Shaft for Clutch and Brake

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 650 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	10	12	20	24	30	40	48	60
Output Speed, RPM	172.5	143.7	86.25	71.87	57.5	43.13	35.94	28.75
HP Input	3.36	2.96	2.00	1.72	1.45	1.15	0.99	0.80
HP Output	3.06	2.65	1.69	1.42	1.14	0.84	0.69	0.52
Torque Out (In Lbs.)	1119	1164	1236	1243	1248	1235	1208	1138

Download the Brochure Here

Download specifications for C70-LHL Right Angle Gear Reducer

TC43 Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor

Output Options:
● Available with 3 shaft extensions (left, right or both)
● 5/8" diameter output shaft available

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5.5	10	14.5	20	30	40	61	80
Output Speed, RPM	314	172.5	118.97	86.25	57.5	43.12	28.28	21.56
HP Input	1.31	1.14	0.90	0.69	0.47	0.42	0.27	0.21
HP Output	1.19	1.00	0.75	0.54	0.33	0.27	0.14	0.11
Torque Out (In Lbs.)	239	367	401	401	367	399	332	317

Download the Brochure Here

Download specifications for TC-43 Right Angle Gear Reducer

CE34 Right Angle Gear Reducer with DC Motor Frame

● Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Aluminum Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Output Shaft
● Ball Bearings on Input Shaft – Front and Back
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

All data is for a Service Factor of 1 at 3000 RPM input speed
Available with 5 Gear Ratios (See Chart Below)

Ratio	8	14.5	20	40	60
Output Speed, RPM	375	206.9	150	75	50
HP Input	0.96	0.67	0.44	0.25	0.14
HP Output	0.89	0.58	0.37	0.18	0.09
Torque Out (In Lbs.)	149	177	153	153	114
Overhung Load, Output at 2 in. from housing (Lbs.)	36	53	64	92	110

Download the Brochure Here

Download specifications for CE34 Right Angle Gear Reducer

L60 Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft – Front and Back
● High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 7 Gear Ratios (See Chart Below)

Ratio	5.5	10	14.5	20	30	40	61
Output Speed, RPM	314	172.5	118.97	86.25	57.5	43.12	28.28
HP Input	1.31	1.14	0.90	0.69	0.47	0.42	0.27
HP Output	1.19	1.00	0.75	0.54	0.33	0.27	0.14
Torque Out (In Lbs.)	239	367	401	401	367	399	332

Download the Brochure Here

U50-RS Right Angle Gear Reducer

● Forged Manganese Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft – Front and Back
● High-Strength, Heat Treated Input and Output Shafts

Output Options: Available with 3 shaft extensions (left, right, or both)

Overhung load on output shaft, 780 lbs. at 1.25 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 3 Gear Ratios (See Chart Below - Other ratios available upon request)

Ratio	20	40	60
Output Speed, RPM	86.25	43.13	28.75
HP Input	1.00	0.62	0.43
HP Output	0.87	0.43	0.26
Torque Out (In Lbs.)	625	620	580

Download the Brochure Here

Download specifications for U50-RS Right Angle Gear Reducer

TC43I Right Angle Gear Reducer with DC Motor Frame

● Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 7 Gear Ratios (See Chart Below)

Ratio	5.5	10	14.5	20	30	40	61
Output Speed, RPM	314	172.5	118.97	86.25	57.5	43.12	28.28
HP Input	1.31	1.14	0.90	0.69	0.47	0.42	0.27
HP Output	1.19	1.00	0.75	0.54	0.33	0.27	0.14
Torque Out (In Lbs.)	239	367	401	401	367	399	332

Download the Brochure Here

L60C Right Angle Gear Reducer with DC Motor Frame

● Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 7 Gear Ratios (See Chart Below)

Ratio	5.5	10	14.5	20	30	40	61
Output Speed, RPM	314	172.5	118.97	86.25	57.5	43.12	28.28
HP Input	1.31	1.14	0.90	0.69	0.47	0.42	0.27
HP Output	1.19	1.00	0.75	0.54	0.33	0.27	0.14
Torque Out (In Lbs.)	239	367	401	401	367	399	332

Download the Brochure Here

L60D Right Angle Gear Reducer with DC Motor Frame

● Bronze Worm Gear
● Induction Hardened, Ground and Polished Worm
● Annealed Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Tapered Roller Bearings on Output Shaft
● Ball Bearings on Input Shaft
● High-Strength, Heat Treated Input and Output Shafts
● Flange for Face-Mounting DC Frame Motor

Output Options: Available with 3 shaft extensions (left, right or both)

Overhung load on output shaft, 400 lbs. at 1.00 in. from housing or output cap
All data is for a Service Factor of 1 at 1725 RPM input speed
Available with 7 Gear Ratios (See Chart Below)

Ratio	5.5	10	14.5	20	30	40	61
Output Speed, RPM	314	172.5	118.97	86.25	57.5	43.12	28.28
HP Input	1.31	1.14	0.90	0.69	0.47	0.42	0.27
HP Output	1.19	1.00	0.75	0.54	0.33	0.27	0.14
Torque Out (In Lbs.)	239	367	401	401	367	399	332

Download the Brochure Here

Download specifications for L60-D Right Angle Gear Reducer

T133M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 300 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	1.15	0.77	0.63	0.5	0.47	0.38	0.29	0.23
HP Output	1.05	0.66	0.5	0.39	0.31	0.25	0.17	0.12
Torque Out (In Lbs.)	2209	247	283	276	339	356	312	219

Download the Brochure Here

Download specifications for T133M-RS Right Angle Gear Reducer

T175M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 650 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	2.83	1.57	1.24	1.26	0.89	0.79	0.5	0.38
HP Output	2.62	1.38	1.06	1.04	0.61	0.49	0.3	0.2
Torque Out (In Lbs.)	499	515	554	737	666	714	538	433

Download the Brochure Here

Download specifications for T175M-RS Right Angle Gear Reducer

T206M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 700 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	3.62	2.77	2.09	1.57	1.65	1.09	0.74	0.6
HP Output	3.33	2.5	1.78	1.29	1.21	0.77	0.46	0.35
Torque Out (In Lbs.)	925	935	1002	914	1310	1120	830	750

Download the Brochure Here

T237M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 900 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	4.32	3.47	2.64	2.06	1.82	1.45	1.32	0.86
HP Output	4.02	1.09	2.22	1.69	1.39	1.02	0.84	0.53
Torque Out (In Lbs.)	766	1158	1249	1195	1507	1483	1527	1149

Download the Brochure Here

Download specifications for T237M-RS Right Angle Gear Reducer

T262M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 1000 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	5.24	4.17	3.22	2.67	2.22	1.85	1.37	1.16
HP Output	4.86	3.74	2.81	2.21	1.68	1.32	0.92	0.77
Torque Out (In Lbs.)	924	1445	1577	1563	1827	1919	1658	1670

Download the Brochure Here

Download specifications for T262M-RS Right Angle Gear Reducer

T325M-RS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 1200 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	9.72	7.19	5.45	4.74	3.66	3.35	2.49	2.03
HP Output	9.06	6.46	4.65	4.07	2.80	2.55	1.88	1.44
Torque Out (In Lbs.)	1724	2419	2611	2875	3045	3692	3413	3127

Download the Brochure Here

Download specifications for T325M-RS Right Angle Gear Reducer

T133M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 300 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	1.15	0.77	0.63	0.5	0.47	0.38	0.29	0.23
HP Output	1.05	0.66	0.5	0.39	0.31	0.25	0.17	0.12
Torque Out (In Lbs.)	209	247	283	276	336	356	312	219

Download the Brochure Here

Download specifications for T133M-HS Right Angle Gear Reducer

T175M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 650 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	2.83	1.57	1.24	1.26	0.89	0.79	0.5	0.38
HP Output	2.62	1.38	1.06	1.04	0.61	0.49	0.3	0.2
Torque Out (In Lbs.)	499	515	554	737	666	714	538	433

Download the Brochure Here

Download specifications for T175M-HS Right Angle Gear Reducer

T206M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 700 Lbs.
All data for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	3.62	2.77	2.09	1.57	1.65	1.09	0.74	0.60
HP Output	3.33	2.5	1.78	1.29	1.21	0.77	0.46	0.35
Torque Out (In Lbs.)	925	935	1002	914	1310	1120	830	750

Download the Brochure Here

Download specifications for T206M-HS Right Angle Gear Reducer

T237M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 900 Lbs.
All data is for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	4.32	3.47	2.64	2.06	1.82	1.45	1.32	0.86
HP Output	4.02	3.09	2.22	1.69	1.39	1.02	0.84	0.53
Torque Out (In Lbs.)	766	1158	1249	1195	1507	1483	1527	1149

Download the Brochure Here

Download specifications for T237M-HS Right Angle Gear Reducer

T262M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 1000 Lbs.

All data is for 1725 RPM input speed

Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	5.24	4.17	3.22	2.67	2.22	1.85	1.37	1.16
HP Output	4.86	3.74	2.81	2.21	1.68	1.32	0.92	0.77
Torque Out (In Lbs.)	924	1445	1577	1563	1827	1919	1658	1670

Download the Brochure Here

Download specifications for T262M-HS Right Angle Gear Reducer

T325M-HS Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 56C Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 1200 Lbs.
All data is for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	9.72	7.19	5.45	4.74	3.66	3.35	2.49	2.03
HP Output	9.06	6.46	4.65	4.07	2.8	2.55	1.88	1.44
Torque Out (In Lbs.)	1724	2419	2611	2875	3045	3692	3413	3127

Download the Brochure Here

Download specifications for T325M-HS Right Angle Gear Reducer

T237M-H43S Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 145TC Frame Motor
● Mounting bases available upon request

Output Options: Available with 2 shaft extensions (left or right)

Overhung Load on Output Shaft, 900 Lbs.
All data is for 1725 RPM input speed
Available with 1 Gear Ratio (See Chart Below)

Ratio	10
Output Speed, RPM	172.5
HP Input	3.47
HP Output	3.09
Torque Out (In Lbs.)	1158

Download the Brochure Here

Download specifications for T237M-H43S Right Angle Gear Reducer

T262M-H43S Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 145TC or 182/4TC Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 1000 Lbs.

All data is for 1725 RPM input speed

Available with 5 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30
Output Speed, RPM	345	172.5	115	86.25	57.5
HP Input	5.24	4.17	3.22	2.67	2.22
HP Output	4.86	3.74	2.81	2.21	1.68
Torque Out (In Lbs.)	924	1445	1577	1563	1827

Download the Brochure Here

Download specifications for T262M-H43S Right Angle Gear Reducer

T325M-H43S Industry Standard Right Angle Gear Reducer

● Bronze Worm Gear
● Hardened and Ground Worm
● Cast Iron Housing, Precision Machined for Accurate Shaft Alignment
● Ball Bearings on Input Shaft
● Tapered Roller Bearings on Output Shaft
● Heat Treated Input and Output Shafts
● Flange for Face-Mounting NEMA 145TC or 182/4TC Frame Motor
● Mounting bases available upon request

Output Options: Available with 3 shaft extensions (left, right, both)

Overhung Load on Output Shaft, 1200 Lbs.
All data is for 1725 RPM input speed
Available with 8 Gear Ratios (See Chart Below)

Ratio	5	10	15	20	30	40	50	60
Output Speed, RPM	345	172.5	115	86.25	57.5	43.13	34.5	28.75
HP Input	9.72	7.19	5.45	4.74	3.66	3.35	2.49	2.03
HP Output	9.06	6.46	4.65	4.07	2.80	2.55	1.88	1.44
Torque Out (In Lbs.)	1724	2419	2611	2875	3045	3692	3413	3127

Download the Brochure Here

Download specifications for T325M-H43S Right Angle Gear Reducer